HK Offroad Parts

Featuring the most compact and efficient suite-case style portable BBQ Kabob Grill (charcoal)

Steel construction measuring 18" length x 10" wide x 4" deep with eight kabob skewer slots. 

Collapsible legs and side table

Air ventilation slots cut into all four corners

Custom cut grilling grate with your name or simple logo included (REQUIRES SEASONING - INSTRUCTIONS PROVIDED). We'll cut any name, logo, artistic design you request as long as there isn't too many fine details in the logo. Text Bash a photo of your requested name/logo etc to inquire if it can be cut into your grilling grate. He may be reached at (626) 710-6455 or email info@hkgrills.com

Ships worldwide. If you don't see a shipping option at check-out for your area, please contact us and we'll be happy to get a shipping quote. 

Free Local Pick-up available in Covina or select shipping for additional charge (calculated at check-out based on your zip code)

Weight: 23 lbs

Hand-built in Covina, California, United States America

Lower skid plate (shown in blue in the photo) for our JL/JT front bumper. This bolts under the bumper to the winch bolts and the four factory mounting points on the lower frame. Constructed with a combination of 1/4" lower skid plate and 10-gauge dimpled plate. May be customized per request. Have dimpled holes, slots, texts, logo etc. 

• Mounts in the center of the cyber truck roof line clearing the glass and the back bed area
• Side rails constructed from 3/16 steel plate and angled to meet the shape of the CT body. Side rails can have custom cut alphanumeric as shown in the sample photo
• Four cross rails constructed of 1" x 2" x .090 rectangle tubes and welded to mounting plates
• Simple installation on factory mounting points using factory hardware. Stainless steel hardware included for cross rails
• Arrives Raw steel - Painting required

• Heavy Duty Rear Tow Hitch w/ Recovery Shackle Tabs
• 1/4" thick wall construction (.250 wall) with 3/4" thick shackle tabs
• Mounts to factory rear mounting point
• Bolt on application. No need to drop gas tank or tank skid plate 
• High clearance - mounts up tight and high against unibody 
• Cutting if plastic bumper fascia is required for this application - see photo for example
• 7-pin adapter included and mounted into 3" square tube towards driver side 
• Heavy Duty application - not D.O.T. certified - for Offroad use only
• This tow hitch is designed for extreme heavy duty towing and recovery use exceeding the WJ's towing limits. Do not attempt to tow more than your vehicles maximum towing capacity
• Arrives raw steel, sanded with 60 grit, ready to paint 

This product is beyond any tow hitch I've come across for the new Bronco. Utilizing the left and right recovery points AND the center tow hitch mounting points on the factory rear cross-member. Our tow hitch ties in to all 8-mounting points for a solid rear hitch for towing and offroad recovery situations. 

• Left and Right 3/4" thick shackle tabs are welded to the base 1/4" mounting plate.
• Center tube is constructed from 2" square x .188 wall (3/16th) going across the factory crossmember, welded to both shackle tabs AND the center hitch mounting points
• Center hitch receiver is welded through the 2" tube and the center mounting c-channel plate
• Class 10.9 hardware included
• Heavy duty application - offroad use only. 
• NO CUTTING, NO DRILLING
• DOES NOT FIT THE TINY SPORT MODEL

Your Toyota 4-Runner has a GVWR of 6,100-lbs. Our winch mount weighs 58-lbs and constructed in a Heavy Duty fashion, gusseted and reinforced accordingly.  When your truck is that heavy, you can't take chances with underbuilt winch mounts because when the time comes to recover your rig when your stuck to its frame in mud, reliability of recovery gear is critical. This is the same winch mount design from our Lexus GX series which have been used and abused throughout the States, well proven solid mounting pattern and design. We are now happy to offer it to our 4-runner crowd who wish to retain the factory bumper fascia. Winch plate is mounted parallel to your frame which is the best pulling point. 

• Arrives Bare Steel - Sanded with 40-grit orbit sand, ready to paint 
• 100% Bolt on application 
• 10-factory mounting points (5 on each side)
• Replaces aluminum bumper guard behind plastic bumper 
• Mounts behind factory plastic bumper fascia
• 100% Domestic Steel 1/4" Plate all around (HEAVY DUTY)
• 3/4" Thick Shackle Tabs welded through and through for 3/4" D-rings w/ 7/8" Pins
• Gusseted and reinforced 
• Mounts winches with standard 10" x 4.5" mounting pattern
• Owner of vehicle must decide where to cut a hole in the either in thr bumper fascia, grill or plastic cover under hood to access winch clutch release lever and/or solenoid. There are winches out now which release the clutch by remote and operate wirelessly if you decide to go that fancy route. We cut a hole into the plastic cover under the hood and easily accessed the lever. There's no reason to actually cut that beautiful bumper, just access it under the hood (see photo)
• Package weight: 65-lbs
• Package Dimensions 42" x 20" x 8
• Flat shipping rate to lower 48-States $81.75. Please contact us for international shipping quotes. 

Finally, a Jerry Can Mount we designed specifically for the Frontrunner Outfitters 5-gallon water jerry can with spigot. I can't tell you how useful this water jerry can is yet how annoying trying to find a place to keep it for quick access of washing hands and utensils at camp. Universal Fit, designed to mount side-ways or straight outwards. If you have a surface to drill four holes, then you can mount this up.

• Constructed of 10-gauge thick steel to handle the 42lbs of water you'll be carrying
• Latch has a padlock loop so you can lock the tank
• Mount it to truck bed racks, swing outs or just bolt it straight to the side of your vehicle like a real adventurer

• Stubby Style and Recessed (Hidden) winch mount
• Side Mounted Flush Mount LED light area (lights not included)
• 1/4" thick Winch Mounting Bottom plate 
• (Optional Lower Skid Plate) 3/16" thick Lower Frame Section Skid plate with 8 DOM Tubes mounts to two winch mounting points and factory mounting points on the lower side of the frame 
• 1/4" Gussets welded to inner bumper for reinforcement
• 3/4" Thick Grade-50 Plate Shackle Tabs for 3/4" D-Rings and Flat Towing capabilities. Shackle tabs go through front plate reaching the frame
• Bumper mounts to frame w/ eight 1/2" Grade-8 Nuts and Bolts and two factory bolts to the side of the frame
• Rubicon Model Compatible
• Arrives Bare Steel
• Compared to 100lbs factory Rubicon Bumper with after-market winch plate and our shackle tab kit, our bumper design weighs 70 lbs so you're shaving off 30lbs of weight and keeping front end protected by solid steel.

Limited Production. Please contact us for availability.

For those who have welded steel rectangular tubes in place of their rocker panels, you can weld on these slider tubes as steps and additional protection on obstacles. 

• Outer tube constructed of 1.5" DOM, available in .120 wall or the massive indestructible .250 wall
• Center plate constructed of 10-gauge, CNC plasma cut and Dimpled in house
• Center plate cut at standard size 2.5" width. Wider plates may be cut upon request 
• Custom initials or logo may be cut at ends of plate per request at no additional charge 
• Outer tube welded to center plate underneath only, giving the center Dimpled plate a floating look. Best design for two tone paint schemes
• Arrives bare steel, fully sanded ready for paint
• We will contact you after ordering to ask for your logo or initials you would like cut into center plate
• Overall length between 61" to 62" perfect for sliders measuring 68" with tapered ends.