Glissade - Rocker Replacement Sliders for the Jeep Grand Cherokee WJ (1999 - 2004).
Currently only available for the WJ. These rock sliders are built for extreme off-roading situations (see video for demo). Used as sliders to get over obstacles and steps to make it easier to reach your roof from the side of your vehicle. Cutting of the outer rocker panel is required. You DO NOT need to cut the pinch seam nor do they mount to the pinch seam. The pinch seam is NOT used in this application. Once you cut out the outer rocker panel, the pinch seam is bent upwards using a pair of heavy duty pliers or pipe wrench. We have a youtube video below showing what to cut and you can do this in your driveway with an extra pair of helping hands.
We considered several important factors when designing our rock sliders. 1) By the time a WJ owner decides it's time for rock sliders, your rocker panels are either destroyed from offroading or rusted away from road salt. Our mounting system utilizes areas where most rockers panels are still in tact and strengthen the rocker area of your WJ. 2) High clearance! 3) Quality Build with quality steel. These are not cheap and building them takes quite the work.
- Can be installed at home, in your driveway with an extra pair of hands and proper tools such as an impact drill (NOT impact wrench) and angle grinder.
- Constructed from 2" x 6" Rectangle Tubes with tapered rounded corners (no boxy look)
- Ends Tapered up 33 degrees and in 45 degrees towards the body
- Increases ground clearance by 1"
- True flat bottom sliders with no obstruction
- Used as Sliders and Steps
- High-lift jacking points on both ends
- Mounting system: Mounts to frame rails with three 1" x 2" rectangle tube brackets welded to the sliders, using twelve self tapping hex screws and across unibody using two cold roll steel bars to sandwich the unibody with ten grade-8 nuts and bolts.
- Cutting of the outer rocker panel is required. You do NOT cut the unibody pinch seam nor does the slider mount to it. If your pinch seam is destroyed, it's OK, you don't need it.
- Detailed instructions provided via YouTube Video
- All required hardware included
- Arrives BARE STEEL
- May be welded to the frame-rails as well in lieu of the self tappers.
-------------------------------------------------------------
California Proposition 65
Warning: Products may contain one or more chemicals known to the State of California to cause cancer, birth defects or reproductive harm.
California law requires businesses to provide a clear and reasonable warning to customers purchasing products in the state of California before knowingly or intentionally exposing a person to a listed chemical.
This warning is required when a business is aware of or believes one or more chemicals is present in their products. HK Offroad is therefore providing this warning because these chemicals may be present in our products.
For more information, click here.